The Makita ML800 18v LXT Cordless LED Head Torch is is a portable, hands-free light source for wherever the job takes you. Equipped with a high-luminance 1.6W single LED which provides a level of illumination of up to 100 lumens. The lamp head adjusts 0 degrees to 90 degrees with 7 positive stops for improved lighting on your work surface. The non-slip rubber strap keeps the lamp head securely attached to hard hats. It features a IPX-4 water-resistant design and it can also be used as a stationary light by attaching the lamp head to the battery holder. Can be powered by both 14.4V and 18V Li-ion batteries. Specifications • Bulb: 1 LED • Battery Type: 18V LXT Lithium-Ion • Voltage: 18 v • Overall Length: 2-13/16" • Net Weight (with battery) : 1.7 lbs / 771 g Features and Benefits High-luminance 1.6W single L.E.D. provides 100 lumens Lamp Head adjusts 0º - 90º with 7 positive stops • Lamp Head features a IPX-4 water-resistant design • Non-slip rubber strap keeps the lamp head securely attached to hard hats • Can also be used as a stationary light by attaching the lamp head to the battery holder • Battery holder features a built-in clip for attaching to belt • 47" cord connects battery holder to the the lamp head • Compact and ergonomic design at only 2-13/16" long • Weighs only 1.7 lbs. with battery (battery not included) • 3-year limited warranty • Battery and charger sold separately • Only use genuine Makita batteries and chargers Contents • Makita ML800 18v LXT Cordless LED Head Torch • Battery and charger sold separately

The DML805 is a 20 LED floodlight which can be run off either corded power or 14.4v / 18v Makita Lithium Ion batteries (not included). It features Makita's XPT Extreme protection technology for enhanced resistance against dust, liquids and adverse weather conditions and can be used as a floorstanding light or mounted on optional tripod model GM00001381 (not included). A Vice clamp is also available separately for attaching DML805s to pipes, scaffolding or studwork.Features and Benefits• 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode• Up to 8.5 hours of continuous illumination with a 5.0Ah 18V LXT battery on High mode (battery and charger not included)• Up to 17 hours of continuous illumination with a 5.0Ah 18V LXT battery on Low mode (battery and charger not included)• Extreme Protection Technology - improved dust and water resistance for operation in harsh conditions (DC power only)• L.E.D. lights illuminate work area effectively without the high heat of halogens• Angle of flood light adjustable• LXT battery can be installed to keep light running in the result of a loss of AC power• AC cord is easily stored and wrapped around mounting stand base• Integrated handle can be used as a hanging hook for user convenience• Light will flash to alert users when running on low battery powerSpecifications• Lumens (high luminance setting): 750• Lumens (low luminance setting): 450• Maximimum cordless runtime with 5.0Ah 18v battery installed: 8.5 hours on high luminance or 17 hours on low luminance.

Makita's ML104 is a tube style cordless work light which is powered by lithium ion batteries from the 12v CXT platform. Equipped with a hanging hook, it can be used in lantern mode to illuminate either directionally or in a 360° radius; alternatively it can also be set to torch mode for handheld use. Further adding to its versatility is an integrated USB port which can be used to charge or power external electronic devices from a CXT battery. Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Lumens 90° Lantern Mode:190 • Lumens 360° Lantern Mode: 710 • Lumens Flashlight Mode: 130 Features and Benefits • Runs off Makita CXT power tool batteries • Three lighting modes for use as a torch or lantern • USB port for charging or powering external devices from CXT battery • Metal hanging hook for lantern use • Hook can be folded away when not in use • XPT dust and water resistant • Comfortable softgrip handle • Up to 5.5 hours of runtime with 4.0ah battery Contents • ML104 Work Light only • No Battery • No Battery Charger

The Makita ML105 is a cordless LED torch which is powered by 10.8v CXT Li-ion power tool batteries (not included). Specifications • Battery Voltage: 10.8v /12v • Battery Type: Makita CXT Lithium Ion Features and Benefits • Multifaceted Reflector • 12 Position pivoting flashlight head • Strap hook • Compact aluminium flashlight head for increased durability • Ergonomically designed handle with soft grip Contents • ML105 Cordless Torch Body only • No Battery • No Charger

The Makita PET Exhaust Air Filter is a high-performance replacement filter designed specifically for the Makita VC4210M Wet and Dry Vacuum Cleaner. This premium filter helps ensure optimal air quality by trapping fine dust particles and preventing them from being released back into the environment. Features and Benefits • Motor cooling filter PET • Dirt repelling surface for easy cleaning • Suitable for use with Makita VC4210 Specifications • Quantity: 1

Makita's CF101DZ is a portable fan which can be powered either via AC mains electricity or by a lithium ion power tool battery from the Makita CXT range. The fan is packed with a host of professional features, including three speeds, automatic oscillation 45° left/right, a three-setting auto off timer switch, adjustable head angle, an adjustable hanging hook and a screw thread for mounting it on a tripod. An AC adaptor is included which enables the fan to be powered via the mains (batteries are not included). Specifications • Max Air Speed (Hi): 180 m/min • Max Air Speed (Med): 150 m/min • Max Air Speed (Lo): 120 m/min • Air Flow (H/M/L): 4.6 / 3.8 / 3.0 m³/min • Run Time (4.0ah) with Oscillation (H/M/L): 4.4 / 6.1 / 9.8 hrs • Battery Type: Makita CXT Lithium-ion (not included) • Diameter (D): 180 mm • Net weight: 1.3 - 1.7 kg Features and Benefits • Compact size allows installation in confined spaces • Automatic oscillation 45° Left / Right • 3-Speed settings (Hi/Med/Low) • Off-timer switch with 3 settings (1/2/4hrs) with LED display • Adjustable fan head angle (up/down/left right) • Adjustable hanging hook • Screw hole for tripod mounting • AC adaptor jack Contents • CF101DZ Corded/Cordless Fan • AC Power Adaptor • No Battery • No Charger • No Case

Something of a unique tool in the Makita cordless range, the DCM501Z is a coffee maker which can run on either CXT, 14.4v or LXT lithium ion power tool batteries and is compatible with 60mm cafe pods as well as ground coffee. It is supplied with a mug and a measuring spoon, meaning you just need to provide the coffee and a suitable battery to enable you to make a brew no matter where you are in the world. Specifications • Battery Type: Lithium-ion • Voltage: 10.8 - 18 v • Brew Capacity on Single CXT Battery: 260 ml • Brew Capacity on Single 14.4V Battery (3.0ah): 260 ml • Brew Capacity on Single 18V Battery (3.0ah): 320 ml • Brew Capacity on Single 18V Battery (6.0ah): 640 ml • Brew Time - 1 cup of coffee (160ml) - CXT: 7 min • Brew Time - 1 cup of coffee (160ml) - 14.4V: 5 min • Brew Time - 1 cup of coffee (160ml) - 18V: 5 min • Compatible coffee pod: 60mm type • Net weight: 1.9 - 2.2 kg Features and Benefits • Compatible with 60mm cafe pods as well as ground coffee • Carry handle for easy transport • Dedicated 240ml cup; designed to fit in machine without leaving a gap to protect against splash and dirt • Commercial cups up to 90mm height will fit the machine • Battery ports for LXT and CXT batteries • Protection cover for empty battery terminal • Boil dry protection function prevents the machine from burning out: If water empties and temperature inside increases, the sensor will turn off power supply automatically Contents • DCM501Z Cordless Coffee Maker • Mug • Measuring spoon • No Battery • No Charger

The DDA460ZK is powered by two standard Makita 18v LXT Lithium-Ion power tool batteries for a total of 36v power from the brushless motor. This rugged and intelligent mechanical 2-speed machine has a chuck capacity of 2 – 13mm and is capable of drilling up to 13mm in steel; 118mm in Lo and 65mm in Hi mode when using a self-feed bit in wood or with a hole saw, 159mm in Lo and 105mm in Hi mode. The addition of Automatic Torque Drive Technology automatically adjusts the drilling speed according to the load conditions to achieve optimum drilling performance. The DDA460 features an electric brake and soft start function, along with a torque limiter which will cut the motor drive should the drill bit snag. Features & Benefits • 2 mechanical gears • ATD automatically changes the drilling speed • Auto power-off function • Automatic Torque Drive Technology • Brushless motor • Electric brake • Forward / reverse rotation • Front handle can be installed in any position within 0°-112.5° • LED job light • Soft start • Torque limiter • Variable speed trigger control Specifications • Battery Voltage: 36v (18v x2) • Battery Type: Li-ion • Capacity in Wood (Auger bit): 50mm • Capacity in Wood: Hole Saw (Lo/Hi): 159/105mm • Capacity in Wood: Self-feed bit (Lo/Hi): 118/65mm • Chuck Capacity: 2-13mm • Max Torque at High Speed (lock torque): 48Nm • Max Torque at Low Speed (torque limiter): 136Nm • No Load Speed (Lo/Hi): 0-350/1,400rpm • Noise K factor: 3dB(A) • Noise sound pressure/power: 85/96dB(A) • Vibration (Drilling into metal): 2.5m/sec² • Vibration K factor: 1.5m/sec² Contents • DDA460ZK 36v Cordless Angle Drill • Chuck key • Grip assembly • Hex wrench • Carry case • No battery • No charger

With variable speed controlled by the grip trigger, and a constant speed control that can be set for constant running when chiselling, the DHR400ZKU can also be with the trigger controlling chiselling for intermittent work. The DHR400ZKU also benefits from Makita Auto-Start Wireless System functionality which allows the tool to automatically connect to compatible Makita dust extractors. Each machine has a unique chip that allows the user to pair it up with the selected dust extractor. This machine also has a Soft Start feature which smoothly accelerates the motor into action. In drilling mode this reduces the sudden torque load on start up. When operating, the torque limiter connected to the side handle will cut the motor drive should the drill bit snag. The soft no load function automatically cuts the motor speed during idling to reduce vibration exposure. Features & Benefits • Auto-Start Wireless System • Connects to compatible Bluetooth dust extractors • Brushless motor for increased runtime • Variable speed • Electric brake • Soft start • Constant speed control • Torque limiter • LED job light • Soft No Load • 2 mode operation Specifications • Battery Voltage: 36v (2x 18v) • Battery Type: Makita LXT Li-on • Max in concrete (TCT bit/core): 40/105mm • Impact energy: 8.0J • Shank: SDS-MAX • Blows per minute: 1450-2900bpm • Noise sound pressure/power: 91/102dB(A) • Noise K factor: 3dB(A) • No Load Speed: 250-500rpm • Vibration K factor: 1.5m/sec² • Vibration (Hammer Drilling/Chiselling): 5.0/4.5 m/sec² • Net weight: 7.3-8.1kg Contents • DHR400ZKU SDS Max Rotary Demolition Hammer • Side Handle • Depth Stop • Bit Grease • Cloth • Wireless Unit • Carry Case • No Batteries • No Charger

The Makita DHS660 Part of the LXT range of cordless tools, is a 165mm (6-1/2") circular saw which is powered by an 18v Lithium Ion battery. Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blade Diameter: 165mm • Max Cut @ 0º: 57mm • Max Cut @ 45º: 41mm • Max Cut @ 50º: 37mm • Bore Diameter: 20mm • Noise sound pressure: 93 dB(A) • Noise sound power: 104 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 5,000 rpm • Vibration K factor: 1.5 m/sec² • Vibration (Cutting Wood): 2.5 m/sec² • Net weight: 2.9 - 3.2 kg Features and Benefits • Electric brake • Soft start • LED job light • Aluminium base with 45° and 50° bevel cutting capacity • Compact and lightweight design • Rear-facing exhaust port • Lock-off button for safe operation • Blower keeps sawdust off the cut line • ADT system automatically changes cutting speed according to load conditions • Indicator light for high speed, high torque or overload • Improved visibility of blade tip • Easy-to-read scale markings Contents • DHS660RTJ 18v Circular Saw • TCT Saw Blade • Hex Key • Rip Fence • Dust Nozzle • No Battery • No Battery Charger

The Makita DHS661 is a 165mm cordless circular saw with an Auto-start Wireless System (AWS) which can connect to compatible dust extractors via Bluetooth for synchronized operation; the extractor will start up and shut down when the trigger is held down or released. The DHS661 also has an integrated blower for clearing dust off the cutting line while the machine is in operation. Additional benefits include an Automatic Torque Drive Technology system which regulates the cutting speed according to load conditions for optimum operation. Lights on the tool indicate if it is experiencing high speed, high torque, or overload. Features & Benefits • Aluminium base with 45 and 50 degrees bevel cutting capacity • Automatic Torque Drive Technology • Auto Start Wireless System • Blower function • Brushless motor • Compact and lightweight design • Easy to read scale markings • Electric brake • Improved visibility of blade tip • Indication lamp for ADT • LED job light • Lock off button for safe operation • Rear facing exhaust port • Soft start Specifications • Battery Voltage: 18v • Battery Type: Makita LXT Lithium Ion • Blade Diameter: 165mm • Bore Diameter: 20mm • Max Cut at 0°: 57mm • Max Cut at 45°: 41mm • Max Cut at 50°: 37mm • No Load Speed: 5,000rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 104dB(A) • Noise Sound Pressure: 93dB(A) • Vibration (Cutting Wood): 2.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 2.9-3.2kg Contents • Makita DHS661 18v LXT Cordless Brushless AWS Circular Saw • TCT Saw Blade • Hex Wrench • Guide Rule • Dust Nozzle • Wireless Unit • No Batteries • No Charger • No Case

The DTR180ZK enables fast and efficient application of rebar tie wire, reducing the need for GC07 Hot-work permits and reliance on manual labour. The DTR180ZK delivers double loop ties at the press of a button and is ideal for time consuming construction tasks like laying concrete foundations over a wide area. It can be used one handed in either single or continuous mode, leaving the other hand free to adjust the position of the rebar. The tool is suitable for use with D10, D13 and D16 rebar in varying combinations of 2, 3 and 4 pieces. In continuous mode the operator can make multiple ties simply by pushing the contact arm against the workpieces while holding the trigger down. According to the condition of the tying material, the tying strength can be adjusted in six stages. Using a 5.0ah 18v battery, up to 120 ties of 0.8mm diameter annealed wire can be accomplished. The DTR180ZK does not produce heat or sparks, therefore operators do not need a GC07 permit to use it. Features & Benefits • Enables automatic & time saving rebar tying • Brushless • Onboard storage for hex key • Ergonomic softgrip handle • Single handed operation • Single or continuous operation modes • Tie wire reel replaced by opening the reel cover • Six stage tying strength adjustment Specifications • Battery Voltage: 14.4v/18v • Battery Type: Makita Li-ion • Tie Wire: 0.8mm • Applicable Rebar: D10 x D10 - (D13 x2) x (D13 x2) • Approximate Ties per Reel: 120 (with BL1850B Battery) • Net weight: 2.3-2.6kg • Vibration no load: 2.5m/sec² • Vibration K factor: 1.5m/sec² • Noise sound pressure: 78dB(A) • Noise K factor: 3dB(A) Contents • DTR180ZK Cordless Rebar Tying Tool • Hex Key • Belt Clip • Carry Case • No Battery • No Charger