Makita's TD110D is a cordless impact driver which runs on 12v CXT batteries. Being a 12v machine, it is much smaller and lighter than 18v equivalents while providing up to 110NM of torque and 3500 impacts per minute for rapid fastening applications. It is equipped with a variable speed trigger and electric brake for optimum control, and benefits from an LED worklight and ergonomic softgrip padding for comfort. Specifications • Battery Voltage: 12v • Battery Type: Makita CXT • Drive shank: Hex ¼ " • Standard Bolt: M5-M12 • High Tensile Bolt: M5-M10 • Machine Screw: M4-M8 • Coarse thread (length): 22 - 90 mm • Impacts: 0 – 3,500 ipm • Max Torque: 110 Nm • No Load Speed: 0 - 2600 rpm Features and Benefits • Slide type Li-ion battery • Electric brake • Variable speed control trigger. • Forward and reverse trigger. • LED job light • Ergonomic soft grip Contents • TD110DZ Cordless CXT Impact Driver • Screwdriver Bit • No Battery • No Charger • No Case

The Makita MAKBLADE PLUS Circular Mitre Saw Blade for Wood is a high-quality cutting tool engineered for precision and efficiency. Designed specifically for woodcutting applications, this saw blade delivers exceptional performance and durability. Crafted from premium materials and featuring advanced tooth geometry, this circular saw blade ensures clean and accurate cuts with minimal splintering. Its innovative design also helps reduce friction and heat buildup, resulting in smoother cutting action and extended blade life. Specifications • Blade Size: 216mm • Cutting Width: 2.4mm • No. of Teeth: 48 • Bore: 30mm • Tooth Angle: 5°

Makita ML002G 40v XGT LED Cordless Lamp. Maximum run time at 710 Lumens for 51 hours using 20 x 0.5W LEDs. 2.4 Amp USB Port for phone charging. Features and Benefits • 0.5W x 20 LED • Max Run Time 51 hours / 710 Lumens • 2.4Amp USB Port for phone charging

The Makita MAKBLADE Circular Saw Blade is a high-performance accessory designed to deliver precise and clean cuts through various types of wood. Featuring precision-ground teeth, the Makblade ensures smooth and accurate cuts while reducing splintering, making it ideal for hardwood, softwood, plywood, and other wooden materials. Its anti-vibration design minimises noise and vibration, enhancing stability and control for a superior cutting experience. The thin kerf design reduces material wastage and requires less power, improving the efficiency of your cutting tasks. Features and Benefits • Suitable for use with mitre saws and table saws • Carbide tipped for increased efficiency • For sawing wood Specifications • Blade Diameter: 305mm • Tooth Quantity: 80 • Bore Size: 30mm • Kerf Dimension: 2.3mm • Rake Angle: 5° • Quantity: 1

The Makita SPECIALIZED Circular Saw Blade for Fiber Cement Board is expertly designed for precision and durability when cutting fiber cement boards and other composite materials. This blade delivers smooth, accurate, and efficient performance on tough, abrasive surfaces. Featuring high-grade polycrystalline diamond (PCD) tipped teeth, the blade ensures exceptional longevity and sharpness, making it perfect for heavy-duty use. Its advanced tooth design provides clean, chip-free cuts, minimising dust and material damage for a professional finish. Features and Benefits • Ideal for fiber cement board • Polycrystalline diamond tipped teeth Specifications • Blade Diameter: 165mm • Bore: 20mm • Kerf Dimensions: 2.3mm • Rake Angle: 12° • Tooth Count: 4

Makita sanding belts compatible with: • 9401 • 9403 • 9404 • 9924DB And Other Makes! Features and Benefits • Belt is designed for use with very powerful belt sanders • For sanding wood and regular steel • Aluminium Oxide grit bonded to cloth backing Specifications • Overall Length: 610mm • Width: 100mm • Grit: 240 • Pack Quantity: 25

The E-06370 is an extensively equipped 212 Piece Drill and Screw Combination Bit Set, suitable for drilling into wood, stone and metal, supplied in a durable plastic carrying case. Features & Benefits • 212 Piece Drill and Screw Combination Bit Set • Supplied in durable plastic carry case Contents • 44x HSS-R Metal Drill Bits: 1(x5), 1.5(x5), 2(x5), 2.5(x4), 3(x5), 3.2(x2), 3.5(x4), 4(x4), 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 9, 10mm • 13x Masonry Drill Bits: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10 x 120mm & 8, 10 x 300mm • 8x Wood Drill Bits, Half Ground: 3, 4, 5, 6, 7, 8, 9, 10mm • 6x 1/4” Hex Shank Flat Bits: 12, 16, 18, 20, 22, 25mm • 60x Screw Bits C-Form: PH0(x2), PH1(x2), PH2(x6), PH3(x2), PH4, PZ0(x2), PZ1(x2), PZ2(x4), PZ3(x2), SL0.5X3(x2), SL0.8X4(x2), SL0.8X5(x2), SL1X5.5(x2), SL1X6(x2), SL1.2X7(x2), SL1.6X8(x2), HEX3, HEX4, HEX5, HEX6, HEX7, HEX8, T10(x2), T15(x2), T20(x2), T25(x2), T27, T30(x2), T35, T40, T45, SQ1, SQ2, SQ3 • 40x Screw Bits E-Form: PH0(x2), PH1(x2), PH2(x3), PH3(x2), PZ0, PZ1(x2), PZ2(x2), PZ3(x2), T10, T15, T20, T25, T27, T30, T40, T45, SL0.5X3(x2), SL0.8X4(x2), SL0.8X5(x2), SL1X6(x2), SL1.2X7, SL1.6X8, HEX3, HEX4, HEX5, HEX6, HEX7, HEX8 • 20x Nut Setters: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm • Counter Sink 12.7 • Magnetic Bit Holder • 4x Depth Stops: 3, 5, 8, 10mm • Hex Wrench for Depth Stop • Diameter Gauge • 4x Hole Saws: 32, 38, 44, 54mm • Arbour for Hole Saw • 3m Tape Measure • Spirit Level • T-shaped screwdriver handle magnetic tip • 2x Centre Ponch: 1.5, 2.5mm • Pencil • Flexible bit holder • Screw driver for C-Form • Plastic Carry Case

The Makita SPECIALIZED Circular Plunge Saw Blade for Aluminium is purpose-built for precision cutting of non-ferrous metals, including aluminium. Equipped with high-grade tungsten carbide-tipped (TCT) teeth, the blade offers extended sharpness and resistance to wear, making it ideal for demanding tasks. Its thin kerf design reduces material waste, enhances cutting efficiency, and maximises the performance of cordless tools by minimising drag. Features and Benefits • Ideal for cutting aluminium • Specialised for plunge saws Specifications • Blade Diameter: 165mm • Bore: 20mm • Kerf Dimensions: 2.4mm • Rake Angle: -3° • Tooth Count: 56

The Makita SPECIALIZED Circular Saw Blade is designed for precision cutting through tough materials like rebar and steel. Specifically engineered for use with the Makita DSC251 Rebar Cutter, this high-performance blade delivers clean, accurate cuts with minimal effort. Featuring high-quality carbide-tipped teeth, the blade ensures maximum durability and longevity, even in demanding environments. Its optimised tooth geometry provides smooth cutting performance, reducing friction and heat buildup, which enhances both efficiency and blade life. With its specialised design for heavy-duty applications, this Makita blade helps you work faster and more efficiently, minimising downtime and increasing productivity. Features and Benefits • Ideal for use with metal • Carbide tipped for efficient cutting Specifications • Blade Diameter: 110mm • Bore Size: 34mm • Tooth Quantity: 24 • Kerf Dimension: 1.5mm • Rake Angle: 0° • Quantity: 1

The MT series from Makita offers a comprehensive list of tools at an affordable market price. Produced to a standard far exceeding that of the DIY market, the MT series combines industrial build quality with fundamental professional requirements, without the professional price tag. The MT series is therefore tailored to suit all discerning home-users, apprentices and trade users who don’t require all the features of a high-end professional machine, just a robust and reliable tool to get the job done. The M9204 is a palm grip random orbit sander which uses widely available 125mm hook & loop sanding discs. It is ideal for smooth, swirl free sanding results on small and medium sized workpieces. Specifications • Abrasive Disc: 125 mm • Noise sound pressure: 81 dB(A) • Noise sound power: 92 dB(A) • Noise K factor: 3 dB(A) • Input Wattage: 240 w • Orbits per Minute: 12,000 opm • Orbit Diameter: 2.8 mm • Sanding Stroke per Minute: 24,000 spm • Paper Fastening: Hook & Loop • Pad Size: 123 mm • Vibration K factor: 1.5 m/sec² • Vibration sanding sheet steel: 3.0 m/sec² • Net weight: 1.2 kg Features and Benefits • Built-in dust collection system • High dust extraction rate • Ergonomically designed handle with rubberised soft grip • Fits the hand perfectly to provide maximum control and comfort • Compact and lightweight design • Connectable to dust extractor • Rocker on/off switch • Double Insulation • Hook and loop type abrasive paper can be used • Sanding pad brake for operator protection Contents • M9204 Random Orbit Sander • Dust Bag • Sanding Disc (x1)

Makita SPECIALIZED Circular Saw Blade for Aluminium Cutting. These blades have excellent cutting performance in aluminium, copper, brass, bronze, and other non-ferrous metals. The blades are also suitable for working on plastics and laminated wood. The T.C.T technology enables the blade to maintain sharpness, providing reliable and accurate cuts over extended periods of use. Features & Benefits • Precision plate tensioning for a flatter blade and truer cuts • Excellent cut quantity in non-ferrous materials Specifications • Bore: 30mm • Diameter: 235mm • Kerf: 2.4mm • Tooth Count: 80 • Material Type: Aluminium • Machine Type: Portable Saw

Makita SPECIALIZED Circular Saw Blade for Aluminium Cutting. These blades have excellent cutting performance in aluminium, copper, brass, bronze, and other non-ferrous metals. The blades are also suitable for working on plastics and laminated wood. The T.C.T technology enables the blade to maintain sharpness, providing reliable and accurate cuts over extended periods of use. Features & Benefits • Precision plate tensioning for a flatter blade and truer cuts • Excellent cut quantity in non-ferrous materials Specifications • Bore: 30mm • Diameter: 250mm • Kerf: 2.4mm • Tooth Count: 80 • Material Type: Aluminium • Machine Type: Portable Saw