The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds Specifications • Diameter: 115mm • Bore: X Lock

The Makita ML800 18v LXT Cordless LED Head Torch is is a portable, hands-free light source for wherever the job takes you. Equipped with a high-luminance 1.6W single LED which provides a level of illumination of up to 100 lumens. The lamp head adjusts 0 degrees to 90 degrees with 7 positive stops for improved lighting on your work surface. The non-slip rubber strap keeps the lamp head securely attached to hard hats. It features a IPX-4 water-resistant design and it can also be used as a stationary light by attaching the lamp head to the battery holder. Can be powered by both 14.4V and 18V Li-ion batteries. Specifications • Bulb: 1 LED • Battery Type: 18V LXT Lithium-Ion • Voltage: 18 v • Overall Length: 2-13/16" • Net Weight (with battery) : 1.7 lbs / 771 g Features and Benefits High-luminance 1.6W single L.E.D. provides 100 lumens Lamp Head adjusts 0º - 90º with 7 positive stops • Lamp Head features a IPX-4 water-resistant design • Non-slip rubber strap keeps the lamp head securely attached to hard hats • Can also be used as a stationary light by attaching the lamp head to the battery holder • Battery holder features a built-in clip for attaching to belt • 47" cord connects battery holder to the the lamp head • Compact and ergonomic design at only 2-13/16" long • Weighs only 1.7 lbs. with battery (battery not included) • 3-year limited warranty • Battery and charger sold separately • Only use genuine Makita batteries and chargers Contents • Makita ML800 18v LXT Cordless LED Head Torch • Battery and charger sold separately

The Makita MAKBLADE PLUS Circular Mitre Saw Blade for Wood is a high-quality cutting tool engineered for precision and efficiency. Designed specifically for woodcutting applications, this saw blade delivers exceptional performance and durability. Crafted from premium materials and featuring advanced tooth geometry, this circular saw blade ensures clean and accurate cuts with minimal splintering. Its innovative design also helps reduce friction and heat buildup, resulting in smoother cutting action and extended blade life. Specifications • Blade Size: 190mm • Cutting Width: 2mm • No. of Teeth: 60 • Bore: 20mm • Tooth Angle: 5°

The Makita 19 Piece HSS-TiN Drill Bit Set (B-67795) is a versatile and durable collection designed for precise drilling in metal, wood, and plastic materials. Each drill bit in this set is made from high-speed steel (HSS) and coated with Titanium Nitride (TiN), enhancing hardness, heat resistance, and durability. The TiN coating reduces friction for smoother drilling and extends the lifespan of the bits. The bits feature a cylindrical shank design, and are compatible with most standard corded or cordless drills. Features & Benefits • High speed steel • Cylindrical shank • Long lasting • Chisel edge • Split point Specifications • Diameter: 1.5-10mm Contents • 1.5 (2), 2 (2), 2.5 (2), 3 (2), 3.5 (2), 4, 4.5, 5, 5.5, 6, 6.5, 7, 8,10mm

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expectancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material removal Specifications • Diameter: 18mm • Overall Length: 340mm • Working Length: 200mm • Shank: SDS Max • Pack Quantity: 1

The Makita ML006G 40V Max XGT Cordless LED Flashlight is a high-performance flashlight that offers exceptional brightness and versatility for a wide range of applications. Designed for use with the XGT cordless system, this flashlight delivers outstanding performance and efficiency, making it an ideal choice for construction, industrial, and other demanding environments. With a powerful LED light source, the 40V Max XGT Cordless Flashlight ML006G provides an impressive 900 lumens of brightness, making it one of the brightest cordless flashlights on the market. This makes it ideal for use in low-light conditions, allowing you to work safely and efficiently, even in the darkest environments. It features a rotating head that allows you to adjust the angle of the light beam, so you can easily direct it exactly where you need it. Features & Benefits • 18 extra bright LEDs provides 500 lumens • Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles • Large retractable hook allows user to hang the flashlight from steel pipes up to 50mm • Light head is rotatable with the flashlight hanging down • 3 ode on/off switch delivers either 500 lumens in high mode, 250 lumens in medium mode or 100 lumens in low mode • Compact, ergonomic and lightweight design • Rubberized soft grip • Light diffusing lens softens LED light to reduce glare and provides widespread illumination Specifications • LED’s: 18w • Illumination: 500lx • Net Weight: 1.1kg Contents • Makita ML006G 40v Max XGT Cordless LED Flashlight • No Batteries • No Charger • No Case

The Makita DC18SD 18V LXT Li-ion Battery Charger is a reliable and efficient charging solution for all your Makita LXT 18V Lithium-Ion batteries. Designed to optimise battery life and performance, this charger ensures your tools are always ready for the job. Featuring advanced charging technology, the Makita DC18SD provides fast and safe charging, reducing downtime and increasing productivity. It is equipped with a built-in fan that cools the battery during charging, preventing overheating and extending battery life. The charger also includes an LED indicator that displays the charging status, making it easy to monitor the progress. Specifications • Battery Voltage: 14.4-18v • Average Charging Time: 30-130min • Charging Time 2ah: 45 min • Charging Time 2.5ah: 45 min • Charging Time 3ah: 60 min • Charging Time 4ah: 90 min • Charging Time 5ah: 110 min • Charging Time 6ah: 130 min • Power Supply Cord: 2m

A comprehensive selection of circular saw blades for all makes and models of portable circular saw.A wide range of sizes from 140mm - 355mm and tooth counts from 10 to 60, the range covers applications from coarse rip and cross cutting to extra fine cross cutting.Features:- Fully hardened and tensioned blades absorb impact and remain flat and true- High grade tungsten carbide with low wear rate for extended blade life- Precision honed for a sharper longer lasting edge- Thin kerf for less waste and reduced feed pressureSpecifications:Bore (B) - 30 mmDiameter (D) - 210 mmKerf (K) - 2.4 mmRake (R) - 20 ºThickness (T) - 1.6 mmTooth Count - 40Material Type - Wood

The Makita DLX2214TJ contians the Makita DHP481 combi drill and the DTD170 impact driver along with a Makpac type 3 carry case, batteries and charger. The ideal introduction to the Makita 18v LXT platform, the batteries and charger included in this kit are compatiable with a wide range of additional cordless tools. Features and Benefits • DHP481 has a twin LED job light with afterglow • Batteries and charger are compatiable with the rest of the Makita LXT 18v range • Stackable Makpac connector case for transport and storage Contents • DHP481Z Combi Drill • DTD170Z Impact Driver • 2 x BL1850B 5ah batteries • DC18RC Fast charger • Makpac type 3 carry case

The Makita Slide Compound Saw LS0714 is a powerful and versatile cutting tool designed for professional carpenters and DIY enthusiasts. Equipped with a 10-amp motor, this saw delivers high performance and precision cutting for a range of materials, including wood, metal, and plastic. The LS0714 features a compact and lightweight design, making it easy to manoeuvre and transport to job sites. Its innovative sliding mechanism allows for smooth and accurate cutting, even when working with wider pieces of material. Features and Benefits • Double insulation • Bevel cutting 45 left 5 right • Dust collection • Can cut over 2" x 8" at 45° • Trench cutting facility • Conveniently located carrying handle for jobsite portability • Powerful 10 AMP motor delivers 6,000 RPM • Smooth easy slide system allows crosscuts up to 11-3/4" wide • Large aluminium turn base supports large stock for efficient cutting Specifications • Voltage: 110v • Max Output Power: 1010w • Capacity 90°: 52 x 300mm • Capacity 45°: 52 x 212mm • Capacity 45° left: 40 x 300mm • Blade Diameter: 190 x 20mm • Power Supply Cord: 2.5m • No Load Speed: 6000rpm • Sound Power Level: 101dB(A) • Product Dimension (L x W x H): 670 x 430 x 458mm • Vacuum Cleaner Connection D in/out: 32/37mm Contents • Makita 110v LS0714N Slide Compound Mitre Saw 190mm • Vertical Vice • Dust Bag • Socket Wrench • Holder • Triangular Rule • 2 x Lock-Off Button • TCT Blade • Kerf Block

The Makita Slide Compound Saw LS0714 is a powerful and versatile cutting tool designed for professional carpenters and DIY enthusiasts. Equipped with a 10-amp motor, this saw delivers high performance and precision cutting for a range of materials, including wood, metal, and plastic. The LS0714 features a compact and lightweight design, making it easy to manoeuvre and transport to job sites. Its innovative sliding mechanism allows for smooth and accurate cutting, even when working with wider pieces of material. Features & Benefits • Double insulation • Bevel cutting 45 left 5 right • Dust collection • Can cut over 2" x 8" at 45° • Trench cutting facility • Conveniently located carrying handle for jobsite portability • Powerful 10 AMP motor delivers 6,000 RPM • Smooth easy slide system allows crosscuts up to 11-3/4" wide • Large aluminium turn base supports large stock for efficient cutting Specifications • Voltage: 240v • Max Output Power: 1010w • Capacity 90°: 52 x 300mm • Capacity 45°: 52 x 212mm • Capacity 45° left: 40 x 300mm • Blade Diameter: 190 x 20mm • Power Supply Cord: 2.5m • No Load Speed: 6000rpm • Sound Power Level: 101dB(A) • Product Dimension (L x W x H): 670 x 430 x 458mm • Vacuum Cleaner Connection D in/out: 32/37mm Contents • Makita 240v LS0714N Slide Compound Mitre Saw 190mm • Vertical Vice • Dust Bag • Socket Wrench • Holder • Triangular Rule • 2 x Lock-Off Button • TCT Blade • Kerf Block

The new Makita DJR187 is a 2-speed reciprocating saw with Brushless motor that will run up to 2,300 spm in low speed and 3,000 spm in high speed. Blade speed is controlled by the variable trigger on the soft grip handle with the electronic 2-speed controls also conveniently placed for comfortable operation when approaching the workpiece from a variety of angles. All Makita reciprocating saws have tool-less blade holders using an easy-to-use twist lock system, and the DJR187 is no exception. The new drive train and shorter brushless motor enables the body housing to be reduced, making this a compact, mobile, powerful and lightweight reciprocating saw. The DJR187 also features an integrated LED job light, electric brake, safety lock-off switch, retractable joist hook and tool-less shoe adjustment. Features & Benefits • Brushless motor • Compact and lightweight • Electric brake • Electronic 2-speed selection • Ergonomically designed handle • High power • LED job light • Lock-off lever • Newly designed crank mechanism for higher efficiency • Retractable joist hook • Tool-less blade change • Tool-less shoe adjustment • Variable speed control by trigger Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Capacity in Mild Steel Pipe: 130mm • Capacity in Wood: 255mm • Noise K factor: 3dB(A) • Noise Sound Power: 95dB(A) • Noise Sound Pressure: 84dB(A) • Stroke Length: 32mm • Strokes per Minute (Hi/Lo): 0-3,000/0-2,300spm • Vibration Cutting Chipboard: 16.5m/sec² • Vibration Cutting Wood: 15.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 3.4-3.8kg Contents • DJR187 18v LXT Reciprocating Saw • BL1850B 18v Li-ion 5ah Battery (x2) • DC18RC 18v Li-ion Charger • Carry Case