Features and Benefits• Double Insulation• Compact & Lightweight• Two speed gear boxSpecificationsMixing Capacity: 50 kgMax Basket Diameter: 140 mmTool Holder Thread: M14 female Input Wattage 240v: 1300 wRated Speed 240v (Low): 0-250 rpmRated Speed 240v (High): 0-450 rpmNet weight: 5.5 kgUsed to stir and mix prefab plaster, gypsum, lime, concrete, and other building materials of high viscosity.

A complete battery and charger starter kit for Makita's 40v XGT cordless power tool range, the 191J85-8 Power Source pack contains a 40v battery charger and two 2.5ah XGT batteries along with a Makpak type 1 stackable case for transport and storage. Makita's 40v XGT range was introduced in 2020 as a powerful, heavy duty cordless platform with an all-new battery system. XGT batteries are encased in heavy duty housings with impact absorbing padding, and can be fully recharged in rapid time (as little as 28 minutes). Two way digital communication between tool and battery ensures optimum performance and reliability at all times, while allowing for future updates to be implemented into the range if necessary. This new platform is not intended as a replacement for the industry standard 18v LXT range, and has been designed to work alongside it: the ADP10 charging adaptor means you can recharge all your LXT and XGT batteries from the same charger to eliminate clutter on site. Makpak cases can be stacked and connected to other cases in the same range, as well as many other Systainer type carry cases from other manufacturers. Features & Benefits • XGT battery and charger starter kit • Contains 2.5ah batteries, charger and Makpak carry case • Greatly increased water and drop impact resistance • Digital communication between the battery and the tool and battery and the charger • Battery fuel gauge: 4 LED gauge with a check button • Cooling system for maximum battery life Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Battery Capacity: 2.5ah • Battery Quantity: 2 Contents • Makita BL4025 40v Max XGT Cordless Li-ion 2.5ah Battery (x2) • Makita DC40RA 40v Max XGT Battery Fast Charger • Makita MakPac Type 1 Connector Case

DDA450 is a cordless angle drill powered by 18V LXT Li-Ion battery. Features & Benefits • Brushless motor • Electric brake • Variable speed trigger control. • 2 mechanical gears. • Soft start • Forward / reverse rotation • LED job light • 13mm keyed drill chuck Specifications • Voltage: 18 v • Battery Type: Lithium-ion • Vibration K factor: 1.5 m/sec² • Noise sound pressure: 83 dB(A) • Noise sound power: 94 dB(A) • Noise K factor: 3 dB(A) • Net weight: 3.2 – 3.5 kg • Capacity in Wood: Auger bit: 38 mm • Capacity in Wood: Hole Saw (Lo/Hi): 127 / 101 mm • Capacity in Wood: Self-feed bit (Lo/Hi): 65 / 50 mm • Max Torque at High Speed: 26 Nm • Max Torque at Low Speed: 70 Nm • Capacity in Steel: 13 mm • Chuck Capacity: 2 - 13 mm • No Load Speed (Hi): 0 - 1,400 rpm • No Load Speed (Lo): 0 - 450 rpm • Vibration: Drilling into metal: 2.5 m/sec² Contents • Makita DDA450ZK 18v LXT Cordless Brushless Angle Drill • No Battery • No Charger • Hook assembly • Side handle • Chuck key holder • Chuck key • Carry case

The Makita BO6050J is a 150mm (6”) Random orbit sander which was developed as the successor to the BO6040. It is a variable speed machine with two operating modes (random orbit and Roto-orbit) which can be used for coarse and fine sanding, buffing and polishing. Specifications • Voltage: 110v • Input Wattage: 750 watts • Disc Diameter: 150mm • Orbit Diameter: 5.5mm • Orbits per Minute: 1,600 - 6,800 opm • Strokes per Minute: 3,200 – 13,600 spm • Noise sound pressure: 82 dB(A) • Noise sound power: 93 dB(A) • Noise K factor: 3 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Sanding): 5 m/sec² • Vibration (Polishing): 3 m/sec² • Net weight: 2.6 kg Features and Benefits • Random orbit mode for finish sanding and buffing • Roto-orbit mode for coarse sanding and polishing • Variable speed control • Soft start • Constant speed control • Pad brake • Ergonomically designed high comfort grip. • Slim skirt provides higher work efficiency in tight spaces e.g. car door handle • Side handle for operator control • Suitable for hook and loop discs Contents • BO6050J Random Orbit Sander 240v • Dust Nozzle • Abrasive Disc • Inlay for Makpac Case • Type 3 Makpac Connector Case

The Makita BO6050J is a 150mm (6”) Random orbit sander which was developed as the successor to the BO6040. It is a variable speed machine with two operating modes (random orbit and Roto-orbit) which can be used for coarse and fine sanding, buffing and polishing. Specifications • Voltage: 240v • Input Wattage: 750 watts • Disc Diameter: 150mm • Orbit Diameter: 5.5mm • Orbits per Minute: 1,600 - 6,800 opm • Strokes per Minute: 3,200 – 13,600 spm • Noise sound pressure: 82 dB(A) • Noise sound power: 93 dB(A) • Noise K factor: 3 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Sanding): 5 m/sec² • Vibration (Polishing): 3 m/sec² • Net weight: 2.6 kg Features and Benefits • Random orbit mode for finish sanding and buffing • Roto-orbit mode for coarse sanding and polishing • Variable speed control • Soft start • Constant speed control • Pad brake • Ergonomically designed high comfort grip. • Slim skirt provides higher work efficiency in tight spaces e.g. car door handle • Side handle for operator control • Suitable for hook and loop discs Contents • BO6050J Random Orbit Sander 240v • Dust Nozzle • Abrasive Disc • Inlay for Makpac Case • Type 3 Makpac Connector Case

The Makita PV001G is an 180mm cordless brushless polisher powered by 40v Max Li-ion battery. This model is designed mainly for polishing applications in the car painting industry. The lower max rotation speed uses for polishing curved portions, narrow spaces or for finish polishing. The higher max rotation speed is used for scratch removal with polishing compound. Features & Benefits • Lock-on function • Trigger lock • Soft start • Constant speed control • Anti-restart function • Easy to grip head shape • Dust cover • Variable speed control dial with indication of max rotation speed Specifications • Battery Type: Makita XGT Lithium-ion • Voltage: 40v • Noise Sound Pressure: 80 dB(A) • Noise K Factor: 3 dB(A) • Spindle Size: M14 • Max Wheel Diameter: 180mm • Pad Size: 165mm • No Load Speed: 0-2,200 rpm • Vibration K Factor: 1.5m/sec² • Vibration Polishing: 2.5m/sec² Contents • Makita PV001GZ 40v Max XGT Cordless Brushless Polisher • No Battery • No Charger • No Case • Accessory Set • Sleeve • Loop Handle • Dust Cover • Wool Pad

Powered by a high-performance motor, the HP2010N delivers impressive drilling power, effortlessly drilling through wood, metal, masonry, and more. Its variable speed control allows for precise drilling in various applications, while the percussion action enhances drilling efficiency, especially in tough materials. Equipped with a durable all-metal gear housing, the HP2010N is built to withstand the rigors of heavy-duty use on construction sites and in workshops. The ergonomic design with a comfortable rubberized grip ensures optimal control and reduced fatigue during prolonged use, enhancing user comfort and productivity. The integrated depth gauge enables accurate drilling depths, ensuring consistent and professional results every time. With its compact and lightweight design, this percussion drill is easy to manoeuvre and transport, making it ideal for a variety of drilling tasks in confined spaces or overhead applications. Features & Benefits • Depth gauge for increased drilling consistency • Variable speed • Double insulated • Lock-on button for continuous operation • Mechanical 2-speed Specifications • Voltage: 110v • Continuous Input Power: 750W • Drill Chuck Capacity: 2-13mm • Max Drilling Diameter in Wood: 40mm • Max Drilling Diameter in Concrete: 20mm • Max Drilling Diameter in Steel: 13mm • Max Drilling Diameter in Masonry: 20mm • Power Supply Cord: 2.5m • Weight without Cable: 2.9kg • Product Dimensions: L.350 x W.71 x H.187mm Contents • Makita HP2010N/1 Hammer Drill 110v • Grip Assembly • Stopper Pole Set Pin • Key Holder 13mm • Chuck Key 13mm • Plastic Case • Band 5704R

Powered by a high-performance motor, the HP2010N delivers impressive drilling power, effortlessly drilling through wood, metal, masonry, and more. Its variable speed control allows for precise drilling in various applications, while the percussion action enhances drilling efficiency, especially in tough materials. Equipped with a durable all-metal gear housing, the HP2010N is built to withstand the rigors of heavy-duty use on construction sites and in workshops. The ergonomic design with a comfortable rubberized grip ensures optimal control and reduced fatigue during prolonged use, enhancing user comfort and productivity. The integrated depth gauge enables accurate drilling depths, ensuring consistent and professional results every time. With its compact and lightweight design, this percussion drill is easy to manoeuvre and transport, making it ideal for a variety of drilling tasks in confined spaces or overhead applications. Features & Benefits • Depth gauge for increased drilling consistency • Variable speed • Double insulated • Lock-on button for continuous operation • Mechanical 2-speed Specifications • Voltage: 240v • Continuous Input Power: 750W • Drill Chuck Capacity: 2-13mm • Max Drilling Diameter in Wood: 40mm • Max Drilling Diameter in Concrete: 20mm • Max Drilling Diameter in Steel: 13mm • Max Drilling Diameter in Masonry: 20mm • Power Supply Cord: 2.5m • Weight without Cable: 2.9kg • Product Dimensions: L.350 x W.71 x H.187mm Contents • Makita HP2010N/2 Hammer Drill 110v • Grip Assembly • Stopper Pole Set Pin • Key Holder 13mm • Chuck Key 13mm • Plastic Case • Band 5704R

Model DTW190 is an entry level 18v cordless impact wrench with an optimal tightening torque of 190 N.m. Not Recommended for Scaffolding Applications. Features & Benefits • Electric brake • Variable speed control trigger. • Forward/reverse rotation • LED job light • Equipped with Battery protection circuit: designed to protect the battery from damages due to over discharge, high temperature or overload current • Ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control and comfort Specifications • Battery Type: Lithium-ion • Voltage: 18v • Driving Shank: 1/2" Square • Impacts : 0-3,000 ipm • Standard Bolt: M8-M16 • High Tensile Bolt: M8-M12 • Noise sound pressure: 94 dB(A) • Noise sound power: 105 dB(A) • Noise K factor: 3 dB(A) • No Load Speed: 0 - 2,300 rpm • Max Fastening Torque: 190 Nm • Vibration: Fastening Bolt: 8.5 m/sec² • Vibration K factor: 1.5 m/sec² Contents • DTW190RTJ Cordless Impact Wrench • 2x BL1850 18v 5Ah Li-ion Batteries • Makpac Connector Case (Type 2) • DC18RC Compact Charger

The Makita SDS Max Dust Extraction Drill Bits are designed to revolutionise your drilling experience by combining exceptional performance with advanced dust extraction capabilities. These high-quality drill bits are perfect for users seeking efficient, clean, and precise drilling in concrete, masonry, and other tough materials. These drill bits feature an SDS Max shank, ensuring a secure and stable fit with a wide range of SDS Max rotary and demolition hammers. This robust connection enhances energy transfer, providing superior impact and drilling efficiency. Equipped with built-in dust extraction channels, these drill bits effectively remove dust and debris directly from the hole during drilling. This feature not only keeps the work area clean but also improves visibility and accuracy. Features & Benefits • Tungsten carbide tip • For use on concrete • For SDS MAX hammers • Dustless Specifications • Diameter: 28mm • Overall Length: 900mm • Working Length: 700mm • Quantity: 1

The Makita LS0815FLN 216mm Slide Compound Mitre Saw is a cost-effective power tool which features an integrated laser marker. For increased visibility, the saw also features an LED job light. The soft grip handle and sub fence (left side only) ensures comfort and control throughout use. Features & Benefits • Soft start • Soft grip handle • Built in laser guide • LED job light • Sliding sub fence (Left side only) • High cutting capacity • Carrying handle for easy transport • Holder can be attached to both sides of base Specifications • Blade Diameter: 216 mm • Max mitre range: 50 - 60° • Bore Diameter: 30mm • Max bevel range: 48 - -5° • Cut Capacity Mitre 0°, Bevel 0°: 65mm x 305mm • Cut Capacity Mitre 0°, Bevel 45° Left: 50mm x 305mm • Cut Capacity Mitre 0°, Bevel 5° Right: 60mm x 305mm • Cut Capacity Mitre 45°, Bevel 0°: 65mm x 215mm • Cut Capacity Mitre 45°, Bevel 45° Left: 50mm x 215mm • Cut Capacity Mitre 60°, Bevel 0°: 65mm x 150mm • Noise sound pressure: 87 dB(A) • Noise sound power: 110 dB(A) • Noise K factor: 3 dB(A) • Input Wattage: 1400w • No Load Speed: 5000 rpm • Vibration K factor: 1.5 m/sec² • Vibration no load: 2.5 m/sec² • Net weight: 14.1 kg

The Makita RS002G XGT 40v Max Brushless Circular Saw 260mm is a cordless rear handle saw powered by 40v Max XGT Li-Ion battery. The new XGT revolutionary technology ensures that battery and the tools' motor technology work together for optimum performance. The tool includes Automatic Torque Drive Technology which automatically changes the cutting speed according to load condition for optimum operation. The tool also features the useful Auto-Start System (AWS) which connects to compatible dust extractors with Bluetooth. The dust extractor automatically runs while the switch is on. Features & Benefits • Brushless motor • Electric brake • Soft start • Magnesium base • Retractable joist hook • High power similar to AC Tool • Rear handle design • Auto-Start Wireless System - connects to compatible dust extractors with Bluetooth • 56° max bevel capacity • 95mm max cutting depth enables single-pass cutting of a 4x lumber Specifications • Battery Voltage: 40v • Battery Type: Makita XGT Lithium Ion • Blade Diameter: 260mm • Max Cut at 0°: 95mm • Max Cut at 45°: 70mm • Max Cutting Capacity at 56°: 54.5mm • Bore: 25.4/30mm • Noise Sound Pressure: 96dB(A) • Noise Sound Power: 107dB(A) • Noise K Factor: 3dB(A) • No Load Speed: 4,000 rpm • Vibration K Factor: 1.5m/sec² • Vibration Cutting Wood: 2.5m/sec² • Net Weight: 5.7-6.3kg Contents • Makita RS002G 40v Max XGT Cordless Brushless Circular Saw • TCT Saw Blade • Offset Spanner • Guide Rule • No Batteries • No Charger • No Case