The HR2631F is an SDS Plus drill which features Makita's AVT anti-vibration technology. It has three modes for drilling, hammer drilling or chiselling, and chisels can be installed in one of 40 different positions for engaging the work at the optimum angle. Compact and lightweight, it has a torque limiter for safety, comfortable rubberised handle, a variable speed trigger and an LED worklight. The design is more or less identical to the preceding model HR2611F, with the exception of the mode change lever which can now be operated without needing to rotate the chuck. Features & Benefits • Anti vibration technology • LED job light • Modified operation-mode change lever • Modes can now be changed without rotating the chuck • 3 mode operation: Rotation only / Rotation with hammering / Hammering only • One touch sliding chuck for easy bit installation and removal • Variable speed control by trigger • Forward / reverse rotation • Torque limiter • Double Insulation • 40 different bit angle settings • Compact and lightweight design • Depth stop • Ergonomic rubberised soft grip handle Specifications • Input Wattage: 800w • Impact Energy: 2.4J • No Load Speed: 0-1,200rpm • Optimum Drilling Range: 4-18mm • Max in Concrete (TCT Bit): 26mm • Max in Concrete (TCT Core): 68mm • Max in Concrete (Diamond Core): 80mm • Max in Wood: 32mm • Max in Steel: 13mm • Impacts per Minute: 0-4,600ipm • Vibration Chiselling: 9.0m/sec² • Vibration Hammer Drilling: 12.0m/sec² • Noise Sound Pressure: 90dB(A) • Noise K Factor: 3dB(A) • Noise Sound Power: 101dB(A) • Net Weight: 2.9-3.4kg Contents • Makita HR2631F SDS Plus Hammer Drill 240v • Side Handle • Depth Stop • Carry Case

The Makita DDF489 Cordless Brushless Drill Driver is a high-performance tool with a powerful brushless motor powered by an 18v LXT Li-Ion battery. Unlike traditional brushed motors, the brushless motor in this drill driver offers several advantages. It not only delivers longer runtime and extended tool life but also provides superior power and efficiency. This means you can accomplish more work on a single charge, saving time and effort. The Makita DDF489 offers an ergonomic and user-friendly design. The compact and lightweight construction enhances manoeuvrability, ensuring comfortable use even in tight spaces. The ergonomic handle provides a secure grip, reducing user fatigue during prolonged use. The drill driver also features a built-in LED light, which illuminates the work area for improved visibility in dimly lit conditions. Features and Benefits • Battery protection system automatically shuts off power when the battery level is low • Brushless motor • Robust keyless drill chuck with single metal sleeve • Metal gear housing • Excellent drilling capacity Specifications • Battery Type: Makita LXT Li-Ion • Battery Voltage: 18v • Max Drilling D in Steel: 13mm • Driving Shank: ½” • Drill Chuck Capacity: 1.5-13mm • Max Output Power: 620W • Drilling Capacity Wood (Auger Bit): 38mm • Drilling Capacity Wood (Self-feed Bit): 51mm • Dimensions: L174 x W81 x H261mm • Product Net Weight: 1.45kg Contents • Makita DHP480 18v LXT Cordless Brushless Drill Driver • No Batteries • No Charger • No Case • Truss Head Screw M4 • Belt Hook • Screw Bit PH2 45mm Double End

The GA5021C angle grinders have been developed as the most advanced models of the Makita GA5010 series. The electronic control system provides constant speed control, soft start, current limiter, anti-restart protection and an LED power light. The Super Joint System (SJS) reduces vibration and helps to ensure greater user safety and longer tool lifetime, while the large trigger provides ergonomic control. Makita’s Super Joint System was introduced to help prevent damage to the tool and protect the user from injury. SJS is a mechanical clutch system that features a coil spring wrapped around the internal drive spindle. The coil tightens around the spindle when the machine is started, to deliver the motor’s power smoothly and efficiently to the drive shaft or spindle. If the blade jams in the material being cut, it can potentially overload the motor, but Makita’s SJS instantly disengages the drive to the disc and the drive spindle rotates freely, before engaging again to reduce the risk of gearbox damage and injury to the operator. Features & Benefits • Corded 125mm angle grinder • Soft start motor • Electronic current limiter • LED power light • Restart protected • Constant speed control for consistent performance under load • SJS system helps to improve user safety and prevent damage to the tool • Large, comfortable trigger • Brushes can be easily accessed via the side of the housing Specifications • Input Wattage: 1450w • Max Wheel Diameter: 125mm • Bore Diameter: 22mm • Spindle Size: M14 x 2mm • No Load Speed: 10000 rpm • Noise Sound Pressure: 90dB(A) • Noise Sound Power: 101dB(A) • Noise K Factor: 3dB(A) • Net Weight: 2.9-4.1kg Contents • GA5021C Angle Grinder 110v • Grinding Disc • Protective Guard • Spanner • Side Handle

The GA5021C angle grinders have been developed as the most advanced models of the Makita GA5010 series. The electronic control system provides constant speed control, soft start, current limiter, anti-restart protection and an LED power light. The Super Joint System (SJS) reduces vibration and helps to ensure greater user safety and longer tool lifetime, while the large trigger provides ergonomic control. Makita’s Super Joint System was introduced to help prevent damage to the tool and protect the user from injury. SJS is a mechanical clutch system that features a coil spring wrapped around the internal drive spindle. The coil tightens around the spindle when the machine is started, to deliver the motor’s power smoothly and efficiently to the drive shaft or spindle. If the blade jams in the material being cut, it can potentially overload the motor, but Makita’s SJS instantly disengages the drive to the disc and the drive spindle rotates freely, before engaging again to reduce the risk of gearbox damage and injury to the operator. Features & Benefits • Corded 125mm angle grinder • Soft start motor • Electronic current limiter • LED power light • Restart protected • Constant speed control for consistent performance under load • SJS system helps to improve user safety and prevent damage to the tool • Large, comfortable trigger • Brushes can be easily accessed via the side of the housing Specifications • Input Wattage: 1450w • Max Wheel Diameter: 125mm • Bore Diameter: 22mm • Spindle Size: M14 x 2mm • No Load Speed: 10000 rpm • Noise Sound Pressure: 90dB(A) • Noise Sound Power: 101dB(A) • Noise K Factor: 3dB(A) • Net Weight: 2.9-4.1kg Contents • GA5021C Angle Grinder 240v • Grinding Disc • Protective Guard • Spanner • Side Handle

The Makita DTW300 Brushless LXT 1/2" Impact Wrench is ideal for automotive, installation and fabrication trades. Combining extended run time and speed control for unmatched fastening performance. It is powered by a Makita built brushless motor for longer run time. Precise fastening control is achieved through the 4 speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto stop modes offer increased efficiency when the fastener is adequately loosened. The full speed mode function reduces the trigger pull to reach full speed. Features & Benefits • Electric brake • Variable speed control by trigger • Forward / reverse rotation • LED job light • Brushless motor • Electronic 4 stage impact power selection • Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button • Auto stop system available both in forward/reverse rotation modes Specifications • Battery Voltage: 18v • Battery Type: Lithium-ion • Blows per Minute (Max/Hi/Med/Lo): 0-4,000/3,400/2,600,1,800ipm • Driving Shank: 1/2" Square • High Tensile Bolt: M10-M16 • Max. Fastening Torque: 330Nm • No Load Speed (Max/Hard/Med/Soft): 0-3,200/2,600/1,800/1,000rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 108dB(A) • Noise Sound Pressure: 97dB(A) • Nut Busting Torque: 580Nm • Standard Bolt: M10-M20 • Vibration Fastening Bolt: 12.5m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.5-1.8kg Contents • DTW300 18v LXT Cordless Brushless 1/2" Drive Impact Wrench • No Batteries • No Charger • No Case

Lightweight and shock-absorbing, the Li-ion battery range delivers 430% more working capacity during it's lifetime compared to Ni-Cad and is 40% Lighter than Ni-MH. A Makita Li-ion battery has minimal depletion of power during use or in storage over it's lifetime. This battery dual pack includes two Makita BL1850B 18v 5.0ah batteries with LED indicators and is compatible with all tools from the 18v LXT cordless range. Specifications • Voltage: 18v • Capacity: 5.0 Ah • Battery Type: Li-ion • Battery ID: BL1850B Features and Benefits • Unbeatable 45 minute charge time • LED charge indicator on battery • Same weight as 3.0Ah battery • Works with your current Li-ion Chargers • Longer run time and battery life Contents • Two BL1850B 5.0ah Batteries

The Makita TD111D, a 12v CXT impact driver with a brushless motor, delivers an outstanding 135Nm of tightening torque yet weighs just 1.1kg, with an overall length of only 135mm from chuck to back of body. It will deliver up to 3,900 impacts per minute in high-mode with the capacity to drive home an M14 bolt. This compact machine features Makita's A-mode impact operation, which drives fasteners slowly to begin with until the thread tightening reacts when the full power is switched on to drive the fastener home. This mode eliminates screw cam-out and cross threading which causes the fixing to fail. In addition, the TD111D has a variable speed trigger, electric brake, soft grip handle and LED job light. The TD111D is available with charger and two 2.0Ah batteries in a Makpac connector case, or as a body only machine for users who do not require them. Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Drive shank: Hex 1/4 " • Standard Bolt: M5-M14 • High Tensile Bolt: M5-M12 • Machine Screw: M4-M8 • Coarse thread (length): 22 - 90 mm • Max Torque: 135 Nm • Blows per Minute (Hi): 0 - 3900 ipm • Blows per Minute (Lo): 0 - 1600 ipm • No Load Speed (Hi): 0 - 3000 rpm • No Load Speed (Lo): 0 - 1300 rpm Features and Benefits • New A-mode: helps to eliminate cam-out & cross threading • Variable speed • Electric brake • Forward/reverse rotation • LED job light • Compact design with overall length of 135mm • Brushless motor • Ergonomic soft grip • Two selectable Impact Modes (High/Low) • Belt clip Contents • TD111DSAJ Cordless CXT Impact Driver • BL1020B 2.0ah Li-ion Battery (x2) • Battery Charger • Screwdriver Bit • Makpac Connector Case

The Makita DTW251 LXT 1/2" Impact Wrench has a compact, lightweight design and a powerful 4 pole motor. With a conveniently located push-button for forward and reverse options. The body is fitted with an ergonomic soft grip, ideal for prolonged use and less user fatigue. There is also an LED job light with afterglow for working in dark spaces. Features & Benefits • 1/2" drive • 4 pole motor • Conveniently located push button for forward and reverse • High comfort grips • LED job light with afterglow Specifications • Battery Voltage: 18v • Battery Type: Lithium-ion • Drive Square: 1/2" • Impacts: 0-3,200ipm • Max. Torque: 230Nm • No Load Speed: 0-2,100rpm • Noise K Factor: 3dB(A) • Noise Sound Power: 101dB(A) • Noise Sound Pressure: 90dB(A) • Vibration Fastening Bolt: 9.0m/sec² • Vibration K Factor: 1.5m/sec² • Net Weight: 1.7kg Contents • DTW251 18v LXT Cordless 1/2" Drive Impact Wrench • No Batteries • No Charger • No Case

Part of the 12v CXT cordless platform, the PV301D is a compact sander and polisher which can run on any Makita 12v CXT battery. It has a brushless motor and two speed settings, with variable speed control and a lock on switch. The tool is restart protected so it won't start up unexpectedly if the switch is left in the "on" position while changing over a battery. Features & Benefits • Variable speed control • Mechanical 2-speed control • Constant speed control • Brushless motor • Trigger lock • Lock-on switch to reduce user fatigue • Anti-restart function • Ergonomic soft grip Specifications • Battery Voltage: 12v • Battery Type: Makita CXT Lithium Ion • Pad/Disc Diameter (Hook & Loop type): 80 mm • Pad/Disc Diameter (Twist on/off type): 50 mm • Backing Pad Diameter (Hook & Loop type): 75 mm • Backing Pad Diameter (Twist on/off type): 46 mm • No Load Speed (Sanding): 0 - 9500 rpm • No Load Speed (Polishing): 0 - 2800 rpm • Vibration K factor: 1.5 m/sec² • Vibration: Sanding: 2.5 m/sec² • Noise sound pressure: 73 dB(A) • Noise K factor: 3 dB(A) • Net weight: 1.1 - 1.2 kg Contents • Makita PV301D 12v Max CXT Cordless Brushless Sander Polisher • Side handle • Pad • Adaptor • Wool pad • Sponge pad • No Battery • No Charger • No Case

The MAK4 is a premium SDS Max drill bit with a dynamic 4 cutter head. It has a symmetrical head geometry with centering tip which helps to limit the effects of rebar collision, with shortened spiral windings and conical shaped dust tracks for extra fast material removal. The MAK4 significantly raises the performance parameters of drilling speed and life expectancy, considerably reducing the cost per hole. Ideal for concrete, stone, masonry, engineering brick, fixings & anchors. Features & Benefits • Premium SDS Max drill bit with a dynamic 4-cutter head • Symmetrical head geometry with centering tip • Shortened spiral windings and conical shaped dust tracks for extra fast material removal Specifications • Diameter: 18mm • Overall Length: 1320mm • Working Length: 1200mm • Shank: SDS Max • Pack Quantity: 1

The Makita GA7040S01 Angle Grinder 180mm is a high-performance tool. With a powerful 2600w motor, this angle grinder excels in cutting, grinding, and polishing a wide variety of materials, making it ideal for heavy-duty tasks. The 180mm disc size provides enhanced versatility and efficiency for larger projects. This angle grinder features Makita’s soft start technology, ensuring smooth and controlled start-ups for increased safety and precision. The GA7040S01 is also equipped with a torque limiter, which protects the motor by preventing accidental overload, thereby extending the tool's lifespan. Ergonomically designed for user comfort, the GA7040S01 has a robust, easy-to-grip handle that reduces fatigue during prolonged use. The adjustable side handle can be positioned on either side for better control and flexibility. Features & Benefits • Soft start for smooth start-ups • Double insulated • The rubber grip on the handle ensures a good working grip Specifications • Voltage: 110v • Continuous Input Power: 2600w • Max Depth of Cut: 43mm • Spindle Thread: M14 • No Load Speed: 8500 • Grinding Disc Diameter: 180mm • Power Supply Cord: 2.5m • Bore Size: 22.23mm • Weight without Cable: 6.4kg Contents • Makita GA7040S01 Angle Grinder 180mm • Cut Off Wheel Guard 180mm • Vibration Proof Side Handle • Lock Nut Wrench 35

The Makita HP2050F Percussion Drill is a powerful and versatile tool designed for heavy-duty drilling tasks. Featuring a robust 720w motor, this drill effortlessly handles drilling into wood, metal, and masonry. The percussion action provides enhanced drilling performance in tough materials, ensuring efficient and precise results. The HP2050F offers a variable speed control and a 2-speed gearbox, allowing users to adjust the speed and torque to match the application, providing optimal control and flexibility. The ergonomic design, complete with a rubberised soft grip, ensures comfort during extended use, reducing user fatigue. Equipped with a built-in LED light, the HP2050F illuminates the work area, ensuring accuracy even in dimly lit conditions. The forward and reverse switch adds convenience for screwdriving tasks, making it a multifunctional tool. Features & Benefits • 2-mode operation for “Rotation Only” or “Hammering with Rotation” • Variable speed control enables users to match the speed to the application • Rubberised soft grip for more comfort and control • Double insulated Specifications • Voltage: 240v • Continuous Input Power: 720w • No Load Speed: 0-1200 / 0-2900min • Impacts Per Min: 0-24000 / 0-58000min • Max Drilling Dia in Wood: 40mm • Max Drilling Dia in Concrete: 20mm • Max Drilling Dia in Steel: 13mm • Max Drilling Dia in Masonry: 20mm • Drill Chuck Capacity: 1.5-13mm • Collar Clamping Dia: 43mm • Power Supply Cord: 2.5m • Weight without Cable: 2.5kg Contents • Makita HP2050F Percussion Drill • Depth Gauge • Key Holder 13mm • Band, 5704R • Chuck Key S13 • Plastic Carrying Case