The Makita DTW302 is a Cordless Brushless 3/8" Drive Impact Wrench powered by an 18v LXT Li-Ion battery. The variable speed mode can be changed to full speed mode simply by pushing a button. In full speed mode the trigger travel is shorter and the full speed is reached faster. Auto-stop system available both in forward/reverse rotation modes. Specifications • Battery Voltage: 18v • Battery Type: LXT Li-ion • Driving Shank: 3/8" Square, C-ring • High Tensile Bolt: M10-M16 • Max Fastening Torque: 300 Nm • Nut Busting Torque: 500 Nm • Standard Bolt: M10-M20 • No Load Speed (Max/Hard/Med/Soft): 0-3,200/2,600/1,800/1,000 rpm • Blows per Minute (Max): 0-4,000 ipm • Blows per Minute (Hi): 0-3,400 ipm • Blows per Minute (Med): 0-2,600 ipm • Blows per Minute (Lo): 0-1,800 ipm • Noise K factor: 3 dB(A) • Noise sound power: 105 dB(A) • Noise sound pressure: 94 dB(A) • Vibration K Factor: 2.4 m/sec² • Vibration (Fastening Bolt): 15.4 m/sec² Features & Benefits • Auto-stop system • Brushless motor • Compact design with a short overall length of 138mm • Electric brake • Electronic 4 stage impact power selection • Ergonomically designed loop handle with rubberised soft grip • Forward / reverse rotation • LED job light • Trigger switch with full speed mode • Variable speed control by trigger Contents • Makita DTW302Z 18v LXT Cordless Brushless 3/8" Drive Impact Wrench • Belt Clip • No Batteries • No Charger • No Case

The Makita LS004G is a 260mm Cordless Brushless Slide Compound Mitre Saw powered by a 40v Max XGT Li-Ion battery. This mitre saw features a soft start for smooth start-ups and constant speed control to automatically apply additional power to the motor to maintain constant speed under load, to deliver up to 3,600 rpm. It is equipped with a D-handle for increased comfort in use, lock off 2 stage safety switch for increased operator safety and front knob for easy bevel angle adjustments. Additionally the LS004G has holders on both sides of the Saw to hold longer workpieces horizontally and a one touch sliding lock for locking the sliding movement of the carriage and a see through blade guard for increased visibility of the cutting line. Features & Benefits • Auto-Start Wireless System • Brushless motor • Constant speed control • Easy locking and release of bevel angle • Electric brake • Large turn base • LED job light • One-touch sliding lock • Rail-forward design • Soft start • Switch to start up dust extractor Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Blade Diameter: 260mm • Bore Diameter: 30mm • Max Bevel Range: 48-48° • Max Cutting Capacity: 68 x 310mm • Max Mitre Range: 60-60° • No Load Speed: 3,600 rpm • Noise K Factor: 3 dB(A) • Noise Sound Power: 100 dB(A) • Noise Sound Pressure: 91 dB(A) • Vibration K Factor: 1.5 m/sec² • Vibration: 2.5 m/sec² Contents • Makita LS004G 40v Max XGT Brushless Slide Compound Mitre Saw • TCT Saw Blade • Dust Bag • Hex Wrench • Vertical Vice • Accessory set • Wireless Unit • No Batteries • No Charger

The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 110v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 110v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The Makita GA5080RX05 is a 125mm (5") corded slide switch angle grinder featuring the X-LOCK mechanism that enables quick and easy wheel changes. Install and remove the X-LOCK wheels with just a single action without the need for a tool. The X-LOCK wheel can be easily removed simply by pulling up the lever. This features a new tool-less wheel cover for fast and easy adjustment, installation and removal. Specifications • Voltage: 240v • Bore Diameter: 22.23mm • Input Wattage: 1,400W • Max Wheel Diameter: 125mm • Max Wheel Thickness: 6mm • No Load Speed: 12,000 rpm • Noise K factor: 3 dB(A) • Noise sound power: 95 dB(A) • Noise sound pressure: 84 dB(A) • Vibration K factor: 1.5 m/sec² • Vibration (Surface Grinding): 7.9 m/sec² Features & Benefits • Anti-restart function • Constant speed control • Double Insulation • Electronic current limiter for overload protection • New tool-less wheel cover • On/off slide switch • Soft start • Super Joint System mechanical clutch system helps minimise motor and gear damage • X-LOCK mechanism • X-LOCK wheel can be easily removed simply by pulling up the lever Contents • Makita GA5080RX05 Angle Grinder 240v • Dust Cover attachment A • Dust Cover attachment B • Dust Cover attachment C • Depressed Centre Wheel • Anti-vibration Side Handle

The DC40RA is a fast charger for Makita 40v Max XGT Lithium ion power tool batteries. It is equipped with two cooling fans, one for the battery and the other for the charging circuit, enabling it to charge consecutive batteries at the optimum charge time. The DC40RA can also be used to charge Makta's 18v LXT lithium ion batteries if used with the ADP10 adaptor (not included). The DC40RA will fully recharge a 2.5ah 40v battery in approximately 28 minutes and will fully recharge a 4.0ah 40v battery in approximately 45 minutes. Features & Benefits • Fast charger for Makita 40v Max XGT lithium ion power tool batteries • New raised and enlarged charging indicator status light for clearer indication • Selectable melody sound for full charge notification • Two cooling fans, one for the battery and one for the charging circuit • Able to perform consecutive fast charging of batteries • Compatible with interchangeable adaptor ADP10 for charging LXT Li-ion batteries

The DC40RB is a 110V Twin Port Fast Charger, designed for charging battery ranges from 14.4V LXT to 40V Max XGT; ADP10 Interchangeable Adapter Set is required (not included) to charge 14.4V and 18V LXT batteries. The DC40RB is not compatible with G-Series range of batteries. The DC40RB is able to charge two Makita 40V Max Li-ion XGT batteries at the same time as fast as a DC40RA charger charges one battery. The DC40RB performs consecutive fast charges of batteries for increased convenience and features optimum charging control using feedback of real-time battery data. DC40RB is equipped with large charging status indicator light, selectable melody sound for full charge notification, two cooling fans; one for the battery and the other for the charging circuit and electronic current limiter for overload protection. Specifications • 45 minutes to charge BL4040 40V Max 4.0 Ah • 28 minutes to charge BL4025 40V Max 2.5 Ah • 22 minutes to charge BL1830B • 29 minutes to charge BL1840B • 35 minutes to charge BL1850B • 50 minutes to charge BL1860B Features & Benefits • Twin port fast charger for charging battery ranges from 14.4V LXT to 40V Max XGT • Able to charge two Makita 40V Max Li-ion XGT batteries at the same time • Equipped with two cooling fans, one for battery and other for charging circuit • Able to perform consecutive fast charges of batteries for increased convenience • Large charging status indicator light • Electronic current limiter for overload protection

The Makita DC40RC 40v Max XGT Battery Charger is suitable for charging Makita XGT batteries. It features a large charging status indicator light to give a clear indication by LED in colours, blue, green and red, with a raised lens, selectable melody sound for fully charged notification, optimum charging control using feedback of real time battery data and a cooling fan for the battery. It is able to perform consecutive fast charges of batteries and features electronic current limiter for overload protection and is dust and drip proof designed. Specifications • Voltage: 110v • Pack Quantity: 1 • Length: 156mm • Width: 209mm • Height: 84mm Features & Benefits • Able to perform consecutive charging of batteries • Approximately 38 minutes to fully charge a 40v Max 2.5ah battery BL4025 • Can be wall mounted • Charging status indicator light • Compatible with the ADP10 interchangeable adapter for charging LXT Li-ion batteries • Cooling fan for battery • Optimum charging control • Selectable melody sound for full charge notification • Standard charger for XGT batteries Contents • Makita DC40RC 40v Max XGT Battery Charger 110v

The Makita DC40RC 40v Max XGT Battery Charger is suitable for charging Makita XGT batteries. It features a large charging status indicator light to give a clear indication by LED in colours, blue, green and red, with a raised lens, selectable melody sound for fully charged notification, optimum charging control using feedback of real time battery data and a cooling fan for the battery. It is able to perform consecutive fast charges of batteries and features electronic current limiter for overload protection and is dust and drip proof designed. Specifications • Voltage: 240v • Pack Quantity: 1 • Length: 156mm • Width: 209mm • Height: 84mm Features & Benefits • Able to perform consecutive charging of batteries • Approximately 38 minutes to fully charge a 40v Max 2.5Ah battery BL4025 • Can be wall mounted • Charging status indicator light • Compatible with the ADP10 interchangeable adapter for charging LXT Li-ion batteries • Cooling fan for battery • Optimum charging control • Selectable melody sound for full charge notification • Standard charger for XGT batteries Contents • Makita DC40RC 40v Max XGT Battery Charger 240v

The Makita USB Battery Adaptor For XGT 40v Batteries features two Type A (DC5V/2.1A) USB output ports and a LED indicator which turns green while the switch is on so the user can easily see when a device is charging. Features & Benefits • Auto off function • Capable of charging mobile devices such as smartphones and tablets • Features a belt clip • LED charging indicator • On/Off push button switch

The Makita ML003G 40v Max XGT Cordless Led Worklight is equipped with 20 high intensity LED’s for a wider range. These LED lights effectively illuminate the work area without the high heat of halogen bulbs. Supplies 1,100 lumens on high mode or 450 lumens on low mode, with adjustable knobs to enable the user to direct the work light to the desired angle and integral handle that can also be used as a hanging hook. Specifications • Battery Voltage: 40v • Battery Type: XGT Li-ion • Illumination H/L: 1,100 / 450 lumens • Length: 249mm • Width: 298mm • Height: 386mm Features & Benefits • 2 mode operation: delivers 1,100 lumens on High mode or 450 lumens on Low mode • 20 High Intensity LED lights for a wider range • Can be mounted on optional tripod light stand – GM00002073 (not included) • Integrated handle can be used as a hanging hook • IP65 rated for maximum weather and water resistance • Light will flash to alert user when battery charge is low • Lightweight • Up to 10 hours of continuous illumination with a 4.0ah 40v XGT battery on High mode Contents • Makita ML003G 40v Max XGT Cordless Led Worklight • No Batteries • No Charger • No Case

The Makita DML814 is a cordless tower worklight which can deliver a beam of up to 3000 lumens for lighting up the darkest jobsites. It uses three independent LED lights which can be pivoted to cover a wider area. It will run on any Makita 18v LXT or 14.4v lithium ion power tool battery and is IP55 certified for resistance to dust and outdoor weather conditions. The tripod base has a lock-release button which makes it quick and easy to set up and pack away, and for maximum stability it can be fixed to the ground with screws or pegs if required. The battery can also be padlocked to the unit (padlock not included) to prevent theft. A shoulder strap is included for comfortably transporting the light between locations. Features & Benefits • 12 LED Worklight • The light head consists of 3 small light heads, each of them can be pivoted independently • Three brightness settings • Memory function remembers the last brightness setting after the light is powered off • LED colour is daylight white - emulating natural light and ideal for working spaces • Highly stable tripod base which is expandable/foldable simply by sliding the carrying handle • Telescopic light mast enables lighting at a height up to 2.2 m • Light height is adjustable from 125-224 cm • IP55 certified weather and dust resistance • Padlock hole for battery theft protection • Battery capacity warning function • Foldable into a compact size for simple storage and transport Specifications • Battery Voltage: 14.4v / 18v • Battery Type: Makita Lithium Ion • Brightness Settings: 3 • Min/Max Brightness: 900/3000 lumens • Height: 1250mm - 2240mm • Weight: 7.4kg - 8.1kg (depending on battery) Contents • DML814 Cordless Worklight (bare tool) • Shoulder Strap • No Battery • No Charger

This portable tripod is suitable for mounting up to two Makita DML805 LED worklights. The sturdy three-legged design ensures maximum stability wherever the tripod is set up, and the collapsible, lightweight design means it is quick and easy to transport to and from the work area. Features & Benefits • Tripod designed for the Makita DML805 18v Cordless LED worklight • Up to two lights can be mounted on the tripod • Sturdy three legged design for maximum stability • Collapsible for portability • Stand allows for 360° rotation of the light • Convenient design allows for quick and easy installation and removal of lights • Lightweight frame means the tripod can be lifted and carried easily Specifications • Makita Partcode: GM00002283 Contents • Tripod only